8ft LED Tube Light 48W, 5000K, 5800 Lumens, Single Pin, Clear

T8 8ft LED Tube - 5800 Lumens - 48 Watt - 120W Replacement - 5000 Kelvin - Dual Ended FA8 Pin - Fluorescent Fixture Replacement for Garage, Shop, Warehouse, Office, Market - ROHS, ETL ETL Listed
Out of the three main sizes in LED tube -- 2ft, 4ft, and 8ft, the 8ft can be considered as the brightest LED tube because of its ability to deliver a higher lumen output to serve larger applications and higher energy efficiency than what you get with the other sizes. While our 8ft LED tube is available in two main wattages -- 40W & 48W, the 48W can deliver a significant amount of lumens -- 5800 lumens. Having a beam angle of more than 120 degrees, the 8ft LED tube has 3-4 times longer lifespan than the fluorescent tubes, considering the longest lifespan of any fluorescent tube as 15,000 hours. This 8ft LED tube works without ballast and hence the ballast must be bypassed. With an excellent heat dissipation system, this 8ft LED tube is designed to work smoothly and for longer. The 40W 8ft LED tube can replace 120W of any 8ft fluorescent tube and bring about 75% of energy savings.
As ETL listed product, the 8ft LED Tubes is high on safety. You have a completely risk-free 5 years of warranty from the manufacturer's end when you make 8ft LED tube as your lighting choice.

- 5000K Color Temperature: 5000K means neutral white light-day white light color glow ideal for applications where focus and detail is of key concern but the right ambiance is also paramount at the same time.
- Efficient Heat Dissipation mechanism: The heat dissipating mechanism of the 8ft LED tube allows the tube to remain sufficiently cool while in operation and hence operation and maintenance of this 8ft LED tube is fairly easy and convenient.
- Instant Start, No flickering or humming: In extreme contrast with fluorescent tubes, the 8ft LED tube does not flicker and hence lights up without any waiting time.
- Longer Life Expectancy: The 8ft LED tube will last for 50,000 hours if you run the tube for 24 hours a day, more if run for only 12 hours.
- The base type: This 8ft LED tube comes in FA8 (single pin) to retrofit the existing fluorescent tube fixtures.
- Install Easily: This 8ft LED tube can be installed by bypassing the ballast and making direct wiring with the line source.
- 30 Days Return & 5 years of Warranty: If in case, this product is found to have any manufacturing defect, it can be returned within 30 days. You have 5 years of warranty from the manufacturer's end for your hassle-free product trial and usage.
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.

Flicker Free
Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.

IP44 Rated
The LED tubes that are either clear or frosted have an IP44 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.

Voltage Input
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don't have this voltage and wish to convert this voltage range to some other.


Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.

CRI >80
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.

120 Degree Beam Angle
The 120 degrees or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120-degree beam angle.
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that's a pretty good reason as to why the LED tubes don't warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
LED Chip
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from any numbers of chips to ensure high performance and reliability.
Product Specifications
Base Type: | FA8 |
Certifications: | UL |
CRI: | >80 CRI |
Dimensions (L x W x H): | 94.49 |
LED Type: | 2835 |
Lumens: | 5760 Lumens |
MPN (Part No.): | TB014 |
Safety Rating: | UL |
Warranty: | 5 Years |
Beam Angle: | 120 Degree Beam Angle |
Color Temperature (Kelvin): | 5000 Kelvin |
Damp Location: | Damp Location |
IP Rating: | IP44 Rated |
Life Hours: | 50,000 Hours |
Metal Halide Equal: | 120 Watt Replacement |
Operating Temprature: | -4 F TO +113 F |
Voltage: | 100-277 Volt |
Wattage: | 48 Watt |
Product Review
Questions & Answers
Ask a Question-
is this dimmable?
This light is not Dimmable.
-
Will this bulb replace a T12 flourescent bulb?
yes.
-
Will this bulb replace a T12 96 inch flourescent ?
yes, it can replace T12 96-inch fluorescent tubes.
-
my fixture has 96t12 single pin bulbs will your wen-8ft-48w-fa8-5000k-c bulb work in this fixture . what is shipping cost for 2 bulbs to zip 04927
T8 led will work. above $49.99 shipping free.
-
Do these lamps have shatterproof lenses too?
These unfortunately do not.
-
Well this bulb go into the same fixture that a fluorescent bulb goes into
yes, this bulb goes into the same fixture that a fluorescent bulb goes into but you need to bypass the ballast please let us know if you have any more questions.
-
Is the bulb suitable for outside use? The fixtures in question are under a large metal awning adjacent to a Fire Station. The fixtures are not susceptible to rain, but are not climate controlled?
They are not suitable for wet locations.
-
Daisy chaining ??
these light cannot be Daisy chaining.
-
How do I change out a 8ft fluorescent bulb with a led bulb
you need to bypass the ballast, please let us know if you have any more questions.
-
Are the these dimmable?
No
-
My fluorescent fixtures use regular single pin bulbs, it is not a high output unit. Will your bulb WEN-8FT-48W-FA8-5000K-C, 1PK work OK in this fixture? Thanks for your time. Tommy
yes, it will work on your fluorescent fixtures.
-
Are these dimmable?
these are not a dimmable light.
-
what size ballest do i need ro change took?
The ballast for these tubes actually needs to be removed prior to installation.
-
What is the beam angle ?
120 degree.
-
When will bulbs be in stock?
2-3 Weeks, but backorders will be fulfilled first. We suggest placing a backorder.
-
So if the ballast is bypassed is there a driver for these or are they self be balassted an how do you wire them
They are all inclusive.
-
are these line voltage
They are!
-
What is the 48W, 5000k single pin, 8ft led bulb equivalent to if compared to if compared to a standard 8ft incandescent bulb in terms of the number of watts? I don't see anything in your description.
It'll replace up to an 80W one!
-
want to know if this bulb [8ft LED tube 48W 5800 lumens single pin 5000k] is available with frosted lens. would prefer frosted over clear
We offer a 40W style in 4000K and 5000K, both Frosted!
-
How do I get the ballast compatible version of this tube?
Unfortunately, none of our 8FT tubes will be compatible with a ballast. They all require the ballast to be bypassed, then wired as double-ended power (except for our Integrated ones, but they don't have ballasts at all.)
-
My customer needs damp location 8' LED lamps to replace fluorescent tubes. The building was a gas station and the bulbs are under cover but exposed to temperature fluctuations year round. I'll by pass the ballast . They need to be single pin
These are single pin tubes that you're looking at and they're in tock. You'll need a S-P compatible tombstone at each end. And these are rated for -4 degree F to 113 degree F weather, so you'll be fine there.
-
what size ballest do i need ro change took?
The ballast for these tubes actually needs to be removed prior to installation.
-
What is the beam angle ?
120 degree.
-
When will bulbs be in stock?
2-3 Weeks, but backorders will be fulfilled first. We suggest placing a backorder.
-
So if the ballast is bypassed is there a driver for these or are they self be balassted an how do you wire them
They are all inclusive.
-
are these line voltage
They are!
-
What is the 48W, 5000k single pin, 8ft led bulb equivalent to if compared to if compared to a standard 8ft incandescent bulb in terms of the number of watts? I don't see anything in your description.
It'll replace up to an 80W one!
-
want to know if this bulb [8ft LED tube 48W 5800 lumens single pin 5000k] is available with frosted lens. would prefer frosted over clear
We offer a 40W style in 4000K and 5000K, both Frosted!
-
How do I get the ballast compatible version of this tube?
Unfortunately, none of our 8FT tubes will be compatible with a ballast. They all require the ballast to be bypassed, then wired as double-ended power (except for our Integrated ones, but they don't have ballasts at all.)
-
My customer needs damp location 8' LED lamps to replace fluorescent tubes. The building was a gas station and the bulbs are under cover but exposed to temperature fluctuations year round. I'll by pass the ballast . They need to be single pin
These are single pin tubes that you're looking at and they're in tock. You'll need a S-P compatible tombstone at each end. And these are rated for -4 degree F to 113 degree F weather, so you'll be fine there.