T8 4Ft LED Tube - 3000 Lumens - 20 Watt - 50W Replacement - 5000 Kelvin - Fluorescent Fixture Replacement For Garage, Shop, Warehouse, Office, Market
The 4ft. 20W LED tube as a clear tube with 5000K color temperature and a CRI of >80 can deliver lumens up to 3000. It is an excellent substitute for T8, T10 & T12 fluorescent tubes. This 20W can safely and easily replace fluorescent tube of 50W and bring an energy-savings of 30W. Thus, a lower utility bill for you every month. This 20W can work with a ballast and hence the existing fluorescent tube should be taken out and LED tube must be put in its place. However, you must ask us for a ballast compatibility list. These 20W LED tubes are housed in rugged die-cast aluminium for an efficient heat dissipation. For the standard ceiling height, these LED tubes having a beam angle of 120 degree emit enough bright light, have a long lifespan and have a shatterproof coating unlike the fluorescent tubes that were of inferior light quality, typically low lifespan and usually with no shatterproofing. One of the best things about LED tubes from BUILDMyplace is they are UL & DLC listed, these listings make you eligible for handsome rebate along with 5 years of warranty.
- Instant Start: In extreme contrast with fluorescent tubes, the 4ft. 20W LED tube operates without any flickering or buzzing when it starts.
- Better Thermal Management Than The Conventional fluorescent Tubes: The LED tube unlike the fluorescent tube does not warm up very often and hence does not require cooling down. In places where you need consistent lighting throughout the day and night, fluorescent tubes will not work and LED tube then is the best choice.
- 5000K Color Temperature: This color temperature means a neutral white light-daywhite light glow which is ideal for applications requiring an equally productive atmosphere as much as a cozy feel.
- Easy To Install, Easy To Operate & Maintain: The installation is fairly simple and easy. You need to switch off the main power, take out the existing fluorescent tube and then insert the LED tube in the socket. Since, it's ballast compatible, it will work fine. The operational and maintenance issues if at all, must not be that difficult to handle.
- Rebates & Incentives, 30 Days Return Policy & 5 Years Of Manufacturer's Warranty: If however you are not satisfied with our product, you have a 30 days return guarantee from us. We provide 5 years of risk-free warranty along with rebates and incentives that you might be eligible for when purchasing this tube.
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.
The LED tubes that are either clear or frosted have an IP44 rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
The LED tubes accepts an input voltage of 120V-277V. You can go for a waterproof transformer in case you don't have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
120 Degree Beam Angle
The 120 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 degree beam angle.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that's a pretty good reason as to why the LED tubes don't warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for rebate.
|Operating Temprature:||-4? To 113?|
|Beam Angle:||120 Degree Beam Angle|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||47.24 Inch|
|IP Rating:||IP44 Rated|
|Life Hours:||50,000 Hours|
|MPN (Part No.):||TB064|
3 out of 4 would start. The 4th bulb wont start. Checked all connections, other bulbs work in all sockets. One came DOA it seems.
With existing fluorescent fixtures already installed I purchased these LED tubes to replace the 32 watt green tipped fluorescent tubes. I removed the old tubes, installed the new LED tubes, it just cannot get simpler. No wiring alteration needed to bypass ballast. These LED tubes are so much brighter than the old fluorescent tubes and use less power to do it! I'm ordering more.
Questions & AnswersAsk a Question
How do you bypass ballast
hot on one end neutral on the other end , let us know if we could do anything else for you.
which is what the warranty of 5 years covers, because the guarantee link does not work, since it does not give any explanation or information about this
5 years no hassle warranty. this warranty on any products that fail during normal use due to manufacturer’s defect and have been installed and connected properly.
Can I use it for outdoor too?
as long as it's not under the direct rain.
THe lamps I ordered state double ended or single but the documentation only shows single ended. " WORKS WITH OR WITHOUT BALLAST, DOUBLE ENDED POWER OR SINGLE ENDED POWER;" from the page i found them on which is correct?
These ballast compatible ones will work with almost all ballasts. In case it didn't work with your specific ballast, yes you'd have to remove the ballast.
works with or without ballast
I have some older fluorescent lights (at least 20 yrs old with large diameter tubes and some about 10 yrs old with the 1" tubes). will these bulbs work with them or will I need a bypass.
Since your tubes are so old, ours might not be compatible with the ballast, though the list is quite long of compatible ones. I would recommend removing the ballast just so you save the potential hassle of having to return the tubes.
I have barber shop and I want 50 one like this. But I have to make sure about the color. What can color do you have
In terms of the 20W ballast compatible tubes, we offer 5000K and 6500K, which are both a DayLight and brighter type of white. In general with 4ft tubes, we offer 4000K, 5000K, and 6500K.
what is the average bulb life
They're rated for about 50,000hrs.
Will this work with a t-12 magnetic rapid start ballast?
It does work with most magnetic ballasts but not all, so if it didn't work, it'd need to be wired for double or single-ended power and ballast would need removal.
Do you have to use the ballast with the insta fit led. Or can u bypass it
You can certainly bypass the ballast and then wire these for either single or double-ended power.
What is the ballist compatibility list ?
It is a list of ballasts that would work with the tube. If yours isnt on the list and you want the tube, you'd need to remove the ballast and then these Ballast Compatible tubs can be wired as single or double ended power.
I purchased 763684286190 T8 4ft LED Tube and I put them into old 4 ft shop light that plug into outlet and they do not work
It is probably because you didn't check our list to see if your ballast is compatibe, and it probably isn't. What ballast do you have? Also, if you remove the ballast, you can wire these tubes as either double or single-ended power.
Are these bulbs made of plastic instead of glass so they are not breakable?
They're polycarbonate and aluminum and that makes them shatterproof.
Do you ship to Alaska?
Unfortunately, we do not! Most people will get it shipped to Washington and get it forwarded from there.