T8 4ft LED Glass Tube - 50W Equivalent - 5000K Clear Lens - Fluorescent Fixture Replacement for Garage, Shop, Warehouse, Office, Market - ROHS, UL cUL Listed
The 4ft LED Tube of 18W as Frosted glass tube is quite an energy-efficient lighting fixture when compared with standard T8, T10 or T12 fluorescent tubes. With an ultra-wide beam angle of 220°, the light beam can cover huge spaces and provide for general purpose lighting. This product allows for bypassing of the ballast to eliminate any extra power consumption. The product does not require any complex wiring and is thus easy to install. Bypass the ballast before installing the tube Being UL listed, the product is safe for use. You have 3 years of hassle-free warranty on this product
- Wattage: 18Watt
- Lumens: 1710
- Color Temperature: 5000K
- Type: Glass
- Trim: Frosted
- Size: 4ft
- CRI: ≥80
- Beam Angle: 220°
- Dimmable: No
- Ballast Bypass
- cULus Listed
- Warranty: 3 years
- Use Non Shunted tomb stones With This Tube
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don't have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI is greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
220 Degree Beam Angle
All our LED tubes which come in glass have a 220-degree beam angle. This beam angle is used for very huge spaces and wider areas. Designed especially for applications where need a wide lighting area.L06G-V long lifetime and low lumen depreciation reducing the maintenance costs due to L06G-V slim aluminum form, optical and driver integrated.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that's a pretty good reason as to why the LED tubes don't warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers of chips to ensure high performance and reliability.
|Certifications:||UL cUL Listed, ROHS|
|LED Type:||SMD LEDs|
|MPN (Part No.):||TB003|
|Beam Angle:||>220 Degree Beam Angle|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||47.76*1.02*1.02|
|IP Rating:||IP20 Rated|
|Operating Temprature:||-4 F TO +113 F|
Questions & AnswersAsk a Question
The literature states 100 lumens is that correct?
Yes sir, this LED bulb packs 100 LUMENS/ WATT.
Are they dimmable?
No, these lights re not dimmable.
Is this Light required ballast thank you
No, this light must be used with the ballast removed, and with hot and neutral wires on one side only with a non-shunted tombstone. The other end does not get wired, and acts like a placeholder in the fixture.