T8 4ft LED Tube/Bulb - 22W 3000 Lumens 6500K Clear, 2-Row, G13 Base, Double Ended Power - Ballast Bypass
-
Estimated Delivery:May 01 - May 05,the delivery time for cabinets may vary.
-
Free Shipping on select orders & Returns on all orders.
4ft LED ballast bypass bulbs, Clear, 22W, 6500K, >80 CRI, G13 Lighting Fixtures for Shop, Garage, Warehouse & More
BUILDMyplace presents a 22-watt two-row dual-ended LED tube that has a clear housing. This four feet LED tube is energy efficient and is a perfect retrofit for T8, T10, or T12 tubes. Having a long life this tube will run for more than 50,000 hours which means that you won't have to worry about your tube for at least half a decade. The beam angle of these tubes is 120 degrees and these have a clear or frosted cover. These 22 watt LED tubes replace 80-watt fluorescents which means that by installing these tubes you will be saving energy worth 58 watts per hour for as long as you use these lights. These tube lights have an IP rating of 20 which means that these lights are protected from dust and materials larger than 1mm.Â
​​​Features T8 4ft 22W LED Tube, 2-Row LED Tube, 6500K Clear Dual-Ended Power:
- Available Wattage: 22W
- Available Size:Â 4ft
- Color Temperature Available:Â 6500K
- Lifespan - 50,000 hours
- Voltage: 100V - 277V
- ETLÂ CertifiedÂ
- Ballast Bypass
- 5 years of Manufacturer's Warranty
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
Flicker Free
 Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.Â
High CRI
The color rendering index of these tubes is 80 which means that the colors displayed by these tubes are 80% accurate when compared to daylight.Â
IP rated
These tubes have an ingress protection rating of 20 which means that these tubes are protected from dust and any particle larger than 1 mm.
Low maintenance cost
Because of the long life and high-efficiency these tubes need little or no maintenance bringing down the cost of maintenance.Â
Â
Flicker-free
These tubes do not produce any flicker while turning on because these tubes run on the LED technology. Neither do these light produce a humming sound while in operation.
5 years warranty
These tubes have a manufacturer's warranty of five years so that you won't have to worry about your tube light for at least half a decade.Â
Ballast Bypass
This LED tube requires you to either remove the ballast or bypass it. We have prepared a step-by-step guide to help you bypass the ballast to successfully install your LED tube.
120 Degree Beam Angle
The 120 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 degree beam angle. Â Â
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that's a pretty good reason as to why the LED tubes don't warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently. Â Â
LED Chip
 Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.  Â
Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for rebate. Â Â
Product Specifications
| Base Type: | G13 |
| Certifications: | ETL Listed |
| Color Temperature (Kelvin): | 6500 Kelvin |
| IP Rating: | IP20 Rated |
| MPN (Part No.): | TB070 |
| Replaces: | 80 Watt Replacement |
| Safety Rating: | UL |
| Warranty: | 5 Years |
| Beam Angle: | 120 Degree |
| Color Rendering Index(CRI): | >80 CRI |
| Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 Inch |
| Life Hours: | 50,000 Hours |
| Operating Temperature: | -4 Degree F To +113 Degree F |
| Return Policy: | 30 Days Return |
| Voltage: | 100-277 Volt |
| Watt: | 22 Watt |