About Glenwood Cabinet
For those with discerning tastes who want darker shades and a modern Shaker style, there's Glenwood. The clean, well-defined edges and recessed panel doors bring a warm elegance to any home. All cabinets are stained, sealed, and protected by a durable topcoat, resulting in a surface that is virtually family-proof, resisting many household chemicals, water, alcoholic beverages, mild acids and even nail polish. All cabinets are built to last, featuring solid-wood durability, plywood drawers and certification by the Kitchen Cabinet Manufacturers Association as meeting or exceeding the strictest standards in the industry.
Face Frame - All face frames are 3/4” kiln-dried rails, joined by mortise and tenon
with glue. Face Frame in Glenwood DWhite face frames are built using a mixture of solid beech and sycamore.
End Panels - Wood veneered, ½” thick engineered wood core plywood, fastened to the front frame with tongue-in-groove construction. 3/16” hardboard added into sides, interlocked into hanging rails of all wall units, and secured with an adhesive for added strength.
Shelves - Wall cabinets feature adjustable shelves. A selection of six different heights is built on each 30” high and tall wall cabinet. On 2-door wall units, the center 3" stile is used for center support of adjustable shelves. It is recommended that a 1/4" hole be drilled in the back for additional center support. The extra shelf clip is provided. Shelves are 1/2" engineered wood, with rounded front edge and printed wood grain.
Hardware - Features self-closing hinges - no door pulls included.
Door frame - Frames are mortised and tenoned construction of solid oak. The recessed plywood insert is three-ply with a rotary cut red oak veneer.
Shaker style door frames are made of solid beech, mortised and tenoned. The recessed MDF or plywood insert is a three-ply with a rotary cut hard maple veneer.
Drawer heads have routed finger pulls.
Drawers - Plywood drawers are standard on all lines. The drawers operate with a full front to back epoxy coated suspension system on nylon rollers. Drawer fronts of solid oak, poplar, and beech are finger routed on the bottom for easy opening.
Toe kicks - constructed from 3/4″ thick, solid unfinished wood
HUD, FHA, KCMA & ANSI A161.1 Standards