Anatolia · Shop the Belgian Linen collection ›

1 X 4 In Stacked Belgian Light Blend Linen Matte Color Body Porcelain Mosaic

Item 4501-0030-1

4 questions answered

Color: Light Blend · 7 colors
Need a closer look?Order one sheet for $15.04, credited toward your order
See it first: order one sheet $15.04 · one full sheet of this mosaic The cost will be credited toward your full order.
Buy by: the case
$15.70/ sq ft($150.41 / case)

Covers 9.58 sq ft per case · 10 sheets · $15.04 per sheet

How much do you need? 1 case covers 9.58 sq ft

Total: $150.41

Have a large project? Ask for a quote
✓
Deliver to your addressShipping calculated at checkout
…
Checking showroom pickup in LouisvilleCall 502-325-0000 to confirm pickup at 2900 Fern Valley Rd.

211 cases (2021 sq ft) ship from the manufacturer's warehouse

▶
See it live on a video callA Louisville showroom designer walks you through this tile and the pieces that go with it.

Everything you need to install it

Suggested for this tile: profile height 3/8 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.

Edge profile Jolly Decorative Edge-ProtectionFinishes exposed edges where there is no bullnose. 3/8 inch height suits this tile's 9 mm thickness; check it against your setting bed before you order.$33.99 8 ft 2 in length
Spacers Spacer Level System 3.0 mm (1/8") - 1000 Pcs1/8 in (3 mm) spacers for a pressed edge. Your installer may go wider.$16.99 1,000 pieces
Trowel 6 mm X 10 mm - Square Notched Flooring Trowel with Rubber Handle1/4 x 3/8 in notch for tile under 15 in.$13.99  

Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.

Quantities are estimates from your area above. Adjust before you add.

Specifications

Size & packaging
Nominal size1 x 4 in Stacked
Sheet size12 x 12 in
Actual piece size11.73 x 11.73 in
Thickness9 mm
ShapeLinear
Coverage per piece0.96 sq ft
Weight per piece4.0 lb
Sheets per case10
Coverage per case9.58 sq ft
Weight per case40.1 lb
Sold bySingle sheet (0.96 sq ft), or case of 10 sheets (9.58 sq ft)
Details
BrandAnatolia
CollectionBelgian Linen
ColorLight Blend
MaterialPorcelain
FinishMatte
EdgeStraight Edge
LookFabric Look
Shade variationV1 · uniform
Country of originMY
Item number4501-0030-1
Case SKU4501-0030-1-10PC-MC
Performance & ratings
Water absorption< 0.5%
Frost resistanceFrost resistant
Slip resistance (DCOF)0.50 wetID, IW, IW+ · rated for dry interior floors, wet interior floors, showers and wet rooms
Scratch hardness (MOHS)7
PEI wear ratingN/A - UNGLAZED TILE TEST ONLY
Breaking strength>350 lbf
Chemical resistanceClass a
Stain resistanceClass a
Thermal shockPass
Crazing resistancePass
What these ratings mean, in plain English
Water absorption
How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
Frost resistance
Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
Slip resistance (DCOF)
How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
Scratch hardness (MOHS)
How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
PEI wear rating
How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
Breaking strength
How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
Chemical and stain resistance
How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
Thermal shock and crazing
Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
Shade variation
How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
GREENGUARD
Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
Where to useInterior Floor, Interior Wall, Shower Wall, Shower Floor, Exterior Wall, Commercial
Heavy commercialWall
Floor useYes
Wall useYes
Shower floorYes
Overage recommended10%

About Belgian Linen Light Blend

Belgian Linen Light Blend is a 1 x 4 in Stacked matte color body porcelain mosaic on a 12 x 12 in sheet. Each sheet mixes several shades. Rated for interior floor, interior wall, shower wall, shower floor, exterior wall and commercial spaces.

Highlights

  • Look: Fabric Look
  • Finish: Matte
  • Where to use: Interior Floor, Interior Wall, Shower Wall, Shower Floor, Exterior Wall, Commercial
  • Slip rating: DCOF 0.5 (ID, IW, IW+)
  • Shade variation: V1, uniform look
  • Coverage: 0.958 sq ft per sheet; 10 sheets per case

Good to know

  • Low maintenance: clean with a pH-neutral cleaner.
  • Also in Belgian Linen Light Blend: Random Strip mosaic.
  • Order one sheet first to check the color.

Questions

Where can I use 1 X 4 In Stacked Belgian Light Blend Linen Matte Color Body Porcelain Mosaic?

It is commonly used for shower floors, bathroom floors, backsplashes, and accent walls, depending on slip rating, substrate, and installation guidelines.

Is matte porcelain mosaic tile good for bathrooms?

Yes, porcelain is a durable, water-resistant choice for bathroom and kitchen surfaces when installed correctly.

Does 1 X 4 In Stacked Belgian Light Blend Linen Matte Color Body Porcelain Mosaic need sealing?

The tile surface usually does not need sealing, but grout should be sealed if recommended by the grout manufacturer.

What grout color works best with mosaic tile?

Use matching grout for a seamless look or contrasting grout to highlight the pattern; always test a small area first.