Anatolia · Shop the Picasso collection ›
3 X 6 In Picasso Filled & Honed Travertine
Item 5000-0148-0
which finish?
Polished is glossy and reflective. It shows the most veining and light, and is slicker when wet, so check the slip rating (DCOF) before using it on a bathroom or shower floor.
Honed is smooth and matte. Softer, more natural look, more traction when wet, and it hides water spots and footprints.
Same tile body and color, only the surface differs. Not every size is made in both finishes; a dashed size below is made in the other finish only.
Covers 5.5 sq ft per case · 44 pieces
Contractors, multi-room jobs and full-house orders usually get a better price than the website shows.
Tell us the rooms and the square footage and a Louisville tile specialist will send you a quote, often the same day.
7 cases (39 sq ft) ship from the manufacturer's warehouse
Everything you need to install it
Suggested for this tile: profile height 3/8 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.
Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.
Specifications
Size & packaging
Details
Performance & ratings
What these ratings mean, in plain English
- Water absorption
- How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
- Frost resistance
- Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
- Slip resistance (DCOF)
- How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
- Scratch hardness (MOHS)
- How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
- PEI wear rating
- How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
- Breaking strength
- How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
- Chemical and stain resistance
- How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
- Thermal shock and crazing
- Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
- Shade variation
- How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
- GREENGUARD
- Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
About Picasso Picasso
Picasso is a 3 x 6 in travertine tile. Rated for interior floor, interior wall, shower floor, exterior wall and commercial spaces.
Highlights
- Look: Natural Stone, Travertine pattern
- Where to use: Interior Floor, Interior Wall, Shower Floor, Exterior Wall, Commercial
- Slip rating: DCOF 0.42 (ID, IW)
- Shade variation: V4, substantial variation
- Coverage: 5.5 sq ft per case (44 pieces)
Good to know
- Seal before and after grouting and reseal as needed.
- Natural stone: every piece is unique; expect variation in color and veining.
- Also in Picasso: 12 x 12 in tile, 12 x 24 in tile, 16 x 16 in tile, Cobble Stone Pattern Set tile.
- Order a sample first; the sample cost is credited toward your full order.
Questions
What is 3 X 6 In Picasso Filled & Honed Travertine best used for?
It is best used where the 3 X 6 In material product type, finish, and color match the project requirements.
Is this product suitable for bathroom projects?
Yes, if the product type, installation method, and moisture requirements match the bathroom application.
What finish or color should I coordinate with it?
Coordinate it with nearby surfaces, fixtures, and grout or trim. Neutral tones can be matched or contrasted depending on the design.
What should I check before buying?
Check size, material, finish, compatibility, installation location, required accessories, and extra quantity for cuts or waste.
