Samples credited back4.9★★★★★
0

Anatolia · Shop the Ledger Stone collection ›

6 x 18 in Ledger Stone Beachwalk Split Face Quartzite Assembled Corner

Item 5004-0006-1

4 questions answered

Color: Beachwalk4 colors available
Size: 1 size available
Buy by: the piece
$12.60/ piece

Each piece is 18 in long and covers 1.5 linear ft of edge. $75.60 per case of 6 pieces (9.0 linear ft)

Total: $12.60

Have a large project? Ask for a quote
✓
Deliver to your addressShipping calculated at checkout
…
Checking showroom pickup in LouisvilleCall us to confirm pickup at 2900 Fern Valley Rd.

182 pieces ship from the manufacturer's warehouse

▶
See it live on a video callA Louisville showroom designer walks you through it and the pieces that go with it.

Everything you need to install it

Suggested for this tile: profile height 9/16 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.

Edge profile Jolly Decorative Edge-ProtectionFinishes exposed edges where there is no bullnose. 9/16 inch height suits this tile's 15 mm thickness; check it against your setting bed before you order.No 9/16 inch size is in stock for this tile. Choose the size that fits your tile, or call us.Choose a size 8 ft 2 in length
Spacers Spacer Level System 3.0 mm (1/8") - 1000 Pcs1/8 in (3 mm) spacers for a pressed edge. Your installer may go wider.$16.99 1,000 pieces
Leveling clips Tile Leveling System Clips - 500 Pcs Clips(1/6" (1,5mm)1/16 in (1.5 mm) clips. Keep long sides flat and reduce lippage on large format; match the clip to your joint width.$58.99 500 clips
Leveling wedges Tile Leveling System Reusable Wedges - 500 PcsReusable wedges for the clips.$80.99 500 wedges, reusable
Trowel 12 mm X 12 mm - Square Notched Flooring Trowel with Rubber Handle1/2 in square notch for full coverage under a large format tile.$13.99  

Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.

Quantities are estimates from your area above. Adjust before you add.

Specifications

Size & packaging
Nominal size6 x 18 in Assembled Corner
Actual piece size17.72 x 5.91 in (450 x 150 mm)
Thickness15 mm (9/16 in)
ShapeRectangle
Weight per piece6.0 lb
Pieces per case6
Case dimensions20.47 x 6.22 x 3.86 in
Weight per case35.7 lb
Length per piece18 in (1.5 linear ft)
Linear feet per case9.0 linear ft
Sold bySingle piece, or case of 6 pieces (9.0 linear ft)
Details
BrandAnatolia
CollectionLedger Stone
ColorBeachwalk
MaterialQuartzite
FinishNatural
EdgeStraight Edge
LookNatural Stone
Shade variationV4 · substantial variation
Country of originIndia
Item number5004-0006-1
Case SKU5004-0006-0-6PC-MC
Performance & ratings
Water absorption0.18%
Frost resistanceFrost resistant
Scratch hardness (MOHS)4
Chemical resistanceClass c
Stain resistanceClass c
What these ratings mean, in plain English
Water absorption
How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
Frost resistance
Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
Slip resistance (DCOF)
How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
Scratch hardness (MOHS)
How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
PEI wear rating
How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
Breaking strength
How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
Chemical and stain resistance
How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
Thermal shock and crazing
Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
Shade variation
How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
GREENGUARD
Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
Where to useInterior Wall, Exterior Wall, Commercial
Heavy commercialWall
Floor useWall only
Wall useYes
Overage recommended10%
Natural stone careSeal before and after grouting and reseal as needed. Every piece is unique; expect variation in color and veining.

About Ledger Stone Beachwalk

Ledger Stone Beachwalk is a 6 x 18 in Assembled Corner quartzite trim piece. Rated for interior wall, exterior wall and commercial spaces.

Highlights

  • Look: Natural Stone, Quartzite pattern
  • Where to use: Interior Wall, Exterior Wall, Commercial
  • Shade variation: V4, substantial variation
  • Coverage: Sold by the piece; 6 pieces per case

Good to know

  • Seal before and after grouting and reseal as needed.
  • Natural stone: every piece is unique; expect variation in color and veining.
  • Also in Ledger Stone Beachwalk: 6 x 24 in tile.

Questions

What is 6 x 18 in Ledger Stone Beachwalk Split Face Quartzite Assembled Corner best used for?

It is best used where the 6 x 18 in quartz product type, finish, and color match the project requirements.

Is this product suitable for bathroom projects?

Yes, if the product type, installation method, and moisture requirements match the bathroom application.

What finish or color should I coordinate with it?

Coordinate it with nearby surfaces, fixtures, and grout or trim. Neutral tones can be matched or contrasted depending on the design.

What should I check before buying?

Check size, material, finish, compatibility, installation location, required accessories, and extra quantity for cuts or waste.