Samples credited back4.9★★★★★
0

MSI · Shop the Ladson collection ›

Ladson Clayborne 7-1/2 x 75 in 1/2 in White Oak Engineered Hardwood

Item VTWCLAYBORNE7.5X75-1/2-2MM

Need a closer look?Order a sample for $2.99, credited toward your order
Order a sample first $2.99 · a cut sample of this floor in the same colorThe sample cost will be credited toward your full order.
$5.99/ sq ft($209.47 / case)

Covers 34.97 sq ft per case · 9 pieces

How much do you need? 1 case covers 34.97 sq ft

Total: $209.47

Have a large project? Ask for a quote
✓
Deliver to your addressShips from the manufacturer's warehouse · shipping calculated at checkout
–
Pickup not available for this itemNot stocked in Louisville. Call us to arrange showroom pickup.
▶
See it live on a video callA Louisville showroom designer walks you through it and the pieces that go with it.

Specifications

Size & packaging
Nominal size7-1/2 x 75 in
Thickness1/2 in
ShapePlank
Coverage per piece3.89 sq ft
Pieces per case9
Coverage per case34.97 sq ft
Sold byCase of 9 pieces (34.97 sq ft)
Details
BrandMSI
SpeciesWhite Oak
Wear layer (veneer)2.0 mm, sliced
Plank widthWide
GradeCharacter
InstallationGlue Down, Staple Down, Floating
Where in the homeOn Grade, Above Grade, Below Grade
Radiant heatYes
UseLight Commercial
Residential warranty30 years
Structural warrantyLifetime
Commercial warranty5 years
CertificationsGreenguard Gold, FloorScore
CollectionLadson
ColorClayborne
Material
FinishMatte
EdgeMicro-Bevel
Look
Shade variationHigh
Item numberVTWCLAYBORNE7.5X75-1/2-2MM
Case SKUVTWCLAYBORNE7.5X75-1/2-2MM
Performance & ratings
What these ratings mean, in plain English
Water absorption
How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
Frost resistance
Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
Slip resistance (DCOF)
How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
Scratch hardness (MOHS)
How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
PEI wear rating
How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
Breaking strength
How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
Chemical and stain resistance
How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
Thermal shock and crazing
Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
Shade variation
How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
GREENGUARD
Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
Where to useInterior Floor, Commercial
Floor useYes
Wall useNo
Overage recommended10%

About Ladson Clayborne

Clayborne engineered hardwood flooring showcases natural knots and grains, offering a classic look with its warm brown tones.

Protected by CrystaLux Ultra formulation, this flooring provides ultimate durability and longevity against everyday wear and tear.

This flooring provides Embossed in Register (EIR) technology that enhances the texture for a more realistic wood appearance.

This flooring is versatile enough for entryways, kitchens, bathrooms, and other rooms in your home or commercial property.