4ft LED Glass Tube - 1800 Lumens - 18 Watt - 50W Equivalent - 5000 Kelvin - Clear Lens - Fluorescent Light Bulbs Replacement - ROHS, UL cUL Listed - Flicker Free
- Available Wattage: 18W
- Color Temperature: 5000K
- Luminous Flux: 1800 lumens
- Wattage Equivalent: 50W
- Lifespan - 50,000 hours
- Works only With a Ballast [not compatible with every ballast. please ask for compatibility list]
- Voltage: 120V - 277V
- cULus, CE & RoHS approved
- 3 years of Manufacturer's Warranty
The LED tubes that can work with the existing fluorescent tubes do not need any change in a circuit for power supply and hence it is easy to install such LED tubes. But, you just have one disadvantage with such ballast-compatible LED tubes and that is -- the ballast consumes extra power and if the ballast fails, you will need to undergo through ballast replacement in the event that it fails. You need shunted sockets for plug-and-play.
Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.
The LED tubes accept an input voltage of 120V-277V. You can go for a waterproof transformer in case you don't have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option.
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day.
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
220 Degree Beam Angle
The LED tubes have a big heat sink made of aluminum and that's a pretty good reason as to why the LED tubes don't warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume a lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminum and that's a pretty good reason as to why the LED tubes don't warm up too soon to be inconsistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently.
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for a rebate.
Embedded inside the LED tube is a high-quality standalone chip -- SMD LED -- made from many numbers of chips to ensure high performance and reliability.
|Certifications:||UL cUL Listed, ROHS|
|IP Rating:||IP20 Rated|
|Life Hours:||>30,000 Hours|
|MPN (Part No.):||TB005|
|Beam Angle:||>220 Degree Beam Angle|
|Color Temperature (Kelvin):||5000 Kelvin|
|Dimensions (L x W x H):||47.76*1.02*1.02|
|LED Type:||SMD LEDs|
|Operating Temprature:||-4 F TO +113 F|
Questions & AnswersAsk a Question
What is the life span of these light bulbs?
These lights are rated for 30,000 hours and have a 3 year warranty.
will this work with 277 volt ballast?
Yes, that is the highest voltage they're approved for.
Can I put an LED bulb in a florescent light fixture
If it's a 4ft fixture with a type a ballast, then yes.
Where is the compatibility list that I'm supposed to check?
I have sent you the link via email.
Do you send instructions how to bypass ballasts on fixture that has four 8ft flourescent tubes if I buy your LED bulbs
No sir, and we aren't allowed to walk you through it or send you instructions. If you're not comfortable with electricity or the wiring, I would highly recommend getting a licensed proffessional for the installation and for your safety.
What the defiant between T8/T12bulb
Our t8s can replace t12s. t12's are usually 1.5in in diameter whereas t8s are 1inch.
How is ballast configured?
These are meant to work with the ballast you already have so you would wire into the exisitng fixture if your ballast is compatible, which most are with our tubes.
Will they work on light fixtures I already have or does something have to be changed out
These are compatible with most ballasts, but in the case that it doesn't work with the one you have now, you would have to return them.