Hybrid T8 4ft LED Tube/Bulb - 20W 2800 Lumens 4000K Frosted, Single End/Double End Power - Ballast Compatible or Bypass (Check Compatibility List)
-
Estimated Delivery:May 13 - May 17,the delivery time for cabinets may vary.
-
Free Shipping on select orders & Returns on all orders.
4ft LED Tube - 2800 Lumens - 20 Watt - 70W Equivalent - 4000 Kelvin - Frosted Cover - Ballast Compatible
The 4ft. LED tube glass of 20W with a frosted cover available in 4000K color temperature and having a CRI of >80 Â can deliver lumens up to 2800. This product can easily replace T8, T10 & T12 fluorescent tubes of 70W and bring an energy-savings of 50W. Thus, a lower utility bill for you every month. This 20W tube is ballast compatible and it's just that you need to check with the manufacturer for the ballast compatibility list. These 20W LED tubes are housed in rugged die-cast aluminum for efficient heat dissipation. For the standard ceiling height, these LED Tubes having a beam angle of >120 degrees emit enough bright light, have a long lifespan, and have a shatterproof coating unlike the fluorescent tubes that were of inferior light quality, typically low lifespan, and usually with no shatterproof. One of the best things about LED tubes from BuildMyplace is they are ETL & DLC listed, these listings make you eligible for a handsome rebate along with 5 years of warranty.
Features of T8 4FT 20W LED Tube Light
- Available Wattage:Â 20 Watt
- Available Size:Â 4ft
- Available Color Temperature:Â 4000K
- Luminous Efficacy: 130-140 Lm/W
- Wattage Equivalent: 70W
- Lifespan -Â 50,000 hours
- Ballast CompatibleÂ
- Voltage:Â 100V - 277V
- Ballast Compatible [not compatible with every ballast. please ask for compatibility list]
- ETL, DLCÂ approved
- 5 years of Manufacturer's Warranty
Ballast Compatible
The LED tubes that can work with the existing fluorescent tubes do not need any change in circuit for power supply and hence it is easy to install such LED tubes. But, you just have one disadvantage with such ballast-compatible LED tubes and that is -- the ballast consumes extra power and if the ballast fails, you will need to undergo through ballast replacement in the event that it fails.
You need shunted sockets for plug-and-play.Â
Â
Â
Flicker Free
 Whether it's 2ft, 4ft or 8ft LED tube, one of the jaw-dropping features of LED tubes is that they don't flicker unlike what you would have definitely observed in case of fluorescent tubes. The LED tubes start instantly and once they start, they don't flicker and produce a humming sound.Â
IP22 Rated
The LED tubes that are either clear or frosted have an IP22Â rating. This rating signifies that our LED tubes are protected against dust-tight (objects in the dust that are of size more than 1mm) and protected against water-ingress from all directions. For such reasons, LED tubes are safe for use in areas where there is moisture and water. E.g. Bathrooms, kitchens etc.
Voltage Input
The LED tubes accept an input voltage of 100V-277V. You can go for a waterproof transformer in case you don't have this voltage and wish to convert this voltage range to some other.
Low Maintenance Cost
The LED tubes will require low or no maintenance if you are going for a ballast bypass option of LED tube installation. Though not very frequent, but you may have to replace the ballasts once in the total lifetime of LED tubes, if you are going for ballast compatibility option and hence you will have to bear with slightly higher maintenance costs when choosing the former option. Â Â
Â
>50,000 Life Hours
The lifespan of LED tubes is no less than 50,000 hours or 5.7 years, if the tubes are operated upon for 24 hours a day. Can last longer, if the tubes are kept ON for only 12 hours a day. Â
Â
CRI >80
The CRI being greater than 80 for LED tubes, whatever object comes in the light distribution  range appears to be real and natural up to 80% extent on a CRI scale of 1-100 and as it would have appeared in the natural light.
Â
120 Degree Beam Angle
The 120 degree or ultra wide beam angle is made use of when large areas need to be covered. All our LED tubes whether clear or frosted have a 120 degree beam angle. Â Â
Â
Energy Saving
The LED tubes can save energy up to 75% in extreme contrast with fluorescent tubes that consume lot of energy to bring you a higher energy bill. We highly recommend going for our LED tubes that are an excellent combo of lumen brightness and energy-savings.
Aluminium Heat Sink
The LED tubes have a big heat sink made of aluminium and that's a pretty good reason as to why the LED tubes don't warm up too soon to be in consistent operation. This is in extreme contrast with the fluorescent tubes that warmed up too soon and required cooling down to operate efficiently. Â Â
Â
Â
LED Chip
 Embedded inside the LED tube is a high quality standalone chip -- SMD LED -- made from many number of chips to ensure high performance and reliability.  Â
Rebate Eligible
The LED tubes were one of the first LED lighting products to have become rebate eligible. All our LED tubes are DLC approved to make you eligible for rebate. Â Â
Product Specifications
| Base Type: | G13 |
| CCT: | 4000 Kelvin |
| Color Rendering Index(CRI): | >80 CRI |
| Damp Location:: | Damp Location |
| DLC Listed: | Yes |
| IP Rating: | IP22 Rated |
| Life Hours: | 50,000 Hours |
| Lumens: | 2800 Lumens |
| Operating Temperature: | -4 Degree F To +113 Degree F |
| Replaces Fluorescent: | 50 Watt Replacement |
| Safety Rating: | UL/DLC |
| Warranty: | 5 Years |
| Beam Angle: | 120 Degree |
| Certifications: | ETL, DLC Listed |
| Color Temperature (Kelvin): | 4000 Kelvin |
| Dimensions (L x W x H): | 47.75 x 1.15 x 1.32 Inch |
| Housing: | Aluminum + Plastic |
| LED Type: | 2835 |
| Light Distribution: | 130-140 Lm/W |
| MPN (Part No.): | TB010 |
| Replaces: | 70 Watt Replacement |
| Return Policy: | 30 Days Return |
| Voltage: | 100-277 Volt |
| Watt: | 20 Watt |